Medium hard, non-ionic, aliphatic, polyester-based polyurethane dispersion.
Unit of Measure

Physical Properties

Solids

N/A 35 %

Solids Tolerance

N/A ± 1 %

Viscosity

N/A 50 to 500 cps

pH

N/A 4.0 to 7.0

Density

N/A 8.7 lb/gal

Softening Point

N/A 320 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 131 g/L

Tensile Properties

Elongation

N/A 370 %

Tensile Strength

N/A 3375 psi

100 % Modulus

N/A 1040 psi

200 % Modulus

N/A 1640 psi

300 % Modulus

N/A 2550 psi

Note for Tensile Properties

N/A Tested at 20 Inches/Minute

Suggested Uses

N/A L-3632 was designed for use in fiberglass sizing applications that require very good strength, abrasion-resistance and adhesion.

Characteristics

N/A

  • TEA-free, pyrrolidone-free, APEO-free
  • Forms medium hard, tough, flexible films
  • Good abrasion resistance
  • Superior, low temperature flex-crack resistance
  • Contains dipropylene glycol monomethyl ether

Application

N/A L-3632 may be used as a sole vehicle or blended with acrylic emulsions. Viscosity modification can be made with associative thickeners for application by spray, knife-over-roll, or other methods.

Curing

N/A Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. Do not use crosslinking agents for heat-seal coating applications.