An aliphatic, APEO-free, co-solvent free, polyether-based, polyurethane dispersion.

Suggested Uses: L-3037 was designed for base coats or intermediate coats intended for plating/embossing. Films based on this polymer exhibit excellent print retention properties.

  • Excellent print retention properties
  • Contains no co-solvent
  • Produces soft, tough films
  • Good water and solvent-resistance for a soft polymer
  • Dries to clear, glossy film
Unit of Measure

Physical Properties


N/A 35 %

Solids Tolerance

N/A ± 1 %


N/A 50 to 500 cps


N/A 7.0 to 9.5


N/A 8.6 lb/gal

Softening Point

N/A 340 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 20 g/L

Tensile Properties


N/A 520 %

Tensile Strength

N/A >3900 psi

100 % Modulus

N/A 910 psi

200 % Modulus

N/A 1380 psi

300 % Modulus

N/A 1850 psi


N/A Tested at 2 Inches/Minute


N/A L-3037 can be used as a sole vehicle or blended with acrylic emulsions intended for plating applications for spray or roll coating applications. Rheology modifications can be made with associative thickeners.


N/A L-3037 can be forced dried, if desired, depending on film thickness. Typical drying temperatures and dwell times for aqueous finishes are sufficient to produce optimal film properties.