Co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion.

Suggested Uses: HD-2334 was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334 also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited.

  • Permanent, non-leaching flame-retardancy
  • Contains no co-solvent
  • Good UV resistance
  • Stiff, tough, flexible, dry film
  • High melting point (340 ºF)
  • Good low temperature flexibility and crack resistance
Unit of Measure

Physical Properties


N/A 45 %

Solids Tolerance

N/A ± 1 %


N/A 50 to 500 cps


N/A 6.5 to 9.5


N/A 9.1 lb/gal

Softening Point

N/A 340 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 12 g/L

Tensile Properties


N/A 245 %

Ult. Tensile Strength

N/A 3750 psi

100 % Modulus

N/A 2600 psi

200 % Modulus

N/A 3250 psi


N/A Tested at 2 Inches/Minute


N/A Spray or pad - solids may be adjusted for optimum add-on. May be thickened with HA-900 for alternative application methods.


N/A HD-2334 may be air-dried. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. Enhanced properties may be attained through the use of various crosslinkers.