A cost effective, aliphatic polyurethane/acrylic hybrid dispersion with an exceptional balance of properties.

Suggested Uses: HD-5002 was designed for coatings applications on a wide variety of plastic substrates, including ABS, Lexan, Noryl and polystyrene where abrasion and chemical resistance properties are required.

Characteristics:
  • Extreme toughness, abrasion and mar resistance
  • Broad adhesion latitude to plastics
  • Outstanding water and chemical resistance
  • Excellent exterior weathering performance
  • Can be crosslinked to enhance performance
  • Dilution and clean-up with ordinary tap water
  • Contains n-methyl pyrrolidone (NMP) co-solvent
Unit of Measure

Physical Properties

Solids

N/A 40 %

Solids Tolerance

N/A ± 1 %

Viscosity

N/A 50 to 250 cps

pH

N/A 8.0 to 9.5

Density

N/A 8.7 lb/gal

Softening Point

N/A 305 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 50 g/L

Sward Hardness

N/A 52

Pencil Hardness

N/A H

Application

N/A HD-5002 can be used as a sole vehicle for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.

Drying

N/A HD-5002 can be air dried, if desired, depending on film thickness. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.