A hard, co-solvent free, aliphatic, polyester polyurethane dispersion.

Suggested Uses: HD-4675 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood.

  • Contains no co-solvent
  • Produces clear, durable films with low levels of co-solvent (<100 g/l)
  • Excellent non-yellowing properties
  • Good water and chemical resistance
  • Produces tough, abrasion and mar resistant films
Unit of Measure

Physical Properties


N/A 38 %

Solids Tolerance

N/A ± 1 %


N/A 50 to 500 cps


N/A 7.0 to 9.5


N/A 8.7 lb/gal

Softening Point

N/A 345 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 12 g/L

Sward Hardness

N/A 46

Tensile Properties


N/A 190 %

Tensile Strength

N/A >5900 psi

100 % Modulus

N/A 4400 psi


N/A Tested at 2 Inches/Minute


N/A HD-4675 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods.


N/A Due to the co-solvent free nature of HD-4675, the addition of coalescing solvent is recommended to achieve optimal film formation. In ambient-cured systems the addition of 5 - 10 % coalescing solvent is suggested. Less coalescing solvent is required in heat-cured systems to attain comparable film properties. Typical drying temperatures and dwell times for aqueous coatings are sufficient to optimize film characteristics.