Request Information
A low cost, aromatic, polyether-based, aqueous polyurethane dispersion.

Suggested Uses: HD-3011 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance.

Characteristics:
  • Medium soft, tough, flexible film
  • Unusually dry surface for non-blocking applications
  • High melting for thermal stability
  • Can be crosslinked with melamines or aziridines for true thermoset character and increased adhesion.
  • Excellent hydrolytic stability
  • Contains n-methyl pyrrolidone (NMP) co-solvent
Unit of Measure

Physical Properties

Solids

 N/A 35 %

Solids Tolerance

 N/A ± 1 %

Viscosity

 N/A 50 to 200 cps

pH

 N/A 7.0 to 9.5

Density

 N/A 8.4 lb/gal

Softening Point

 N/A 300 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

 N/A 62 g/L

Sward Hardness

 N/A 12

Tensile Properties

Elongation

 N/A 450 %

Tensile Strength

 N/A >4000 psi

100 % Modulus

 N/A 1100 psi

200 % Modulus

 N/A 1600 psi

300 % Modulus

 N/A 2000 psi

Note

 N/A Tested at 20 Inches/Minute

Application

N/A HD-3011 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It can be thickened with associative thickeners for alternative application methods.

Curing

N/A HD-3011 can be air dried at ambient room temperatures. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.