An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion.

Suggested Uses: HD-2602 was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles.

  • May be formulated into low surface tension coatings
  • Excellent abrasion resistance
  • Non-fugitive silicone component
  • Crosslinkable for improved adhesion and performance
  • Contains n-methyl pyrrolidone co-solvent
Unit of Measure

Physical Properties


N/A 35 %

Solids Tolerance

N/A ± 1 %


N/A 50 to 500 cps


N/A 7.0 to 9.5


N/A 8.7 lb/gal

Softening Point

N/A 305 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 105 g/L

Sward Hardness

N/A 35

Tensile Properties


N/A 300 %

Tensile Strength

N/A >6375 psi

100 % Modulus

N/A 3180 psi

200 % Modulus

N/A 4610 psi


N/A Tested at 20 inches/minute


N/A HD-2602 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.


N/A HD-2602 can be air dried, if desired, depending on film thickness. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.