Request Information
An extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties.

Suggested Uses: HD-2117 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance.

Characteristics:
  • Outstanding water and chemical resistance
  • Fast early water resistance development
  • Can be crosslinked to enhance performance
  • Dilution and clean-up with ordinary tap water
  • Contains n-methyl pyrrolidone (NMP) co-solvent
Unit of Measure

Physical Properties

Solids

 N/A 35 %

Solids Tolerance

 N/A ± 1 %

Viscosity

 N/A 50 to 150 cps

pH

 N/A 8.5 to 10.0

Density

 N/A 8.7 lb/gal

Softening Point

 N/A 350 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

 N/A 134 g/L

Tensile Properties

Elongation

 N/A 50 %

Tensile Strength

 N/A >4850 psi

Note

 N/A Tested at 2 Inches/Minute

Application

N/A HD-2117 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.

Drying

N/A HD-2117 may be dried at ambient temperatures with supplemental co-solvent addition of 5 % DPM or DPnB on total formulation weight. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties without additional co-solvent.