A formulated aliphatic polyurethane topcoat which produces a soft, silky feel at low gloss levels.
Unit of Measure

Physical Properties


N/A 43 %

Solids Tolerance

N/A ± 2 %


N/A 1200 to 2500 cps


N/A 7.5 to 10.0


N/A 8.5 lb/gal

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 11 g/L

Volatile Organic Compounds (VOC) Content (Less Water)

N/A 30 g/L

Tensile Properties


N/A 800 %

Tensile Strength

N/A 2200 psi

100 % Modulus

N/A 600 psi

200 % Modulus

N/A 750 psi

300 % Modulus

N/A 900 psi

Note for Tensile Properties

N/A Tested at 20 Inches/Minute

Suggested Uses

N/A L-3595 is designed for use on synthetic leather-like surfaces such as PVC, urethane, and TPO, as well as plastic films and other smooth surfaces.



  • Soft, silky feel
  • Inherently low gloss without the use of silica flatteners
  • Can be cross-linked to enhance performance
  • High solids film former
  • Low VOC: < 50 g/l less water


N/A L-3595 may be used alone or in combination with other resins or additives. May be applied by rotogravure, wire wound rod and spray.


N/A L-3595 can be air-dried. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. L-3595 may be cross-linked with carbodiimides, water-dispersible isocyanates or polyaziridines to further enhance performance.