A VOC-free, water-borne, UV-curable polyurethane dispersion.

Suggested Uses: Hauthane L-3415 is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring.

  • VOC-free, APEO surfactant free
  • Excellent chemical and stain resistance
  • Forms durable, films under ambient or force-dried conditions
  • Superior abrasion resistance
  • Fast water-release properties
Unit of Measure

Physical Properties


N/A 35 %

Solids Tolerance

N/A ± 1 %


N/A 20 to 200 cps


N/A 5.0 to 7.0


N/A 8.7 lb/gal

Uncured Softening Point

N/A 280 ºF

Cured Softening Point

N/A >500 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 0 g/L

Volatile Organic Compounds (VOC) Content (Less Water)

N/A 0 g/L

Sward Hardness

N/A After UV curing - 43


N/A L-3415 may be applied by spray or gravure methods. Films must be dried completely before UV energy cure. UV irradiation is required to attain optimal film properties, but un-cured coating films are durable enough for handling or walking on prior to curing.


N/A L-3415 must be air-dried, or oven dried (temperature: 150 - 170 ºF; dwell time: 10 minutes) to remove water from the film prior to UV exposure. A photo-initiator must be incorporated into the coating formulation for effective curing. See starting point formulations for suggestions. Exposure guidelines: MPMA lamp - 300 watts/in2, 2.0 - 3.0 second dwell time.