A formulated, aliphatic, polyurethane topcoat which produces a soft, slick feel at low gloss levels.

Suggested Uses: Hauthane HD-3830 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces.

Characteristics:
  • Soft, slick feel
  • Low gloss
  • Can be crosslinked to enhance performance
  • Forms a film at room temperature
  • Low VOC: <50 g/l less water
Unit of Measure

Physical Properties

Solids

N/A 35 %

Viscosity

N/A 500-1500 cps

pH

N/A 7.5-10

Density

N/A 8.6 lb/gal

Softening Point

N/A 325 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 14 lb/gal

Volatile Organic Compounds (VOC) Content (Less Water)

N/A 40 g/L

Tensile Properties

Elongation

N/A 500 %

Tensile Strength

N/A 980 psi

100 % Modulus

N/A 380 psi

200 % Modulus

N/A 500 psi

300 % Modulus

N/A 620 psi

Note

N/A Tested at 20 inches/minute

Application

N/A HD-3830 may be used alone or in combination with other polyurethane dispersion resins or additives. It may be applied by rotogravure, wire wound rod and spray.

Curing

N/A HD-3830 can be air-dried. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. HD-3830 may be crosslinked with carbodiimides, water-dispersible isocyanates or polyaziridines to further enhance performance properties.