An aliphatic, polyurethane topcoat which produces a soft, rubbery feel at low gloss levels.

Suggested Uses: Hauthane HD-3810 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces.

  • Soft, rubbery/grabby feel
  • Inherently low gloss without the use of external flatteners
  • Silicone-free
  • Can be crosslinked to enhance performance
  • Forms a film at room temperature
  • Low VOC: <50 g/l less water
Unit of Measure

Physical Properties


N/A 35 %


N/A 500-1500 cps


N/A 7.5-10


N/A 8.6 lb/gal

Softening Point

N/A 300 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 16 g/L

Volatile Organic Compounds (VOC) Content (Less Water)

N/A 47 g/L

Tensile Properties


N/A 550 %

Tensile Strength

N/A 1600 psi

100 % Modulus

N/A 385 psi

200 % Modulus

N/A 480 psi

300 % Modulus

N/A 600 psi


N/A Tested at 20 inches/minute


N/A HD-3810 may be used alone or in combination with other polyurethane dispersion resins or additives. It may be applied by rotogravure, wire wound rod and spray.


N/A HD-3810 can be air-dried. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. HD-3810 may be crosslinked with carbodiimides, water-dispersible isocyanates or polyaziridines to further enhance performance properties.