An extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties.

Suggested Uses: L-2892 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2892 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance.

  • Contains dipropylene glycol dimethyl ether (DMM) co-solvent
  • Outstanding water and chemical resistance
  • Fast early water resistance development
  • Can be crosslinked to enhance performance
Unit of Measure

Physical Properties


N/A 34 %

Solids Tolerance

N/A ± 1 %


N/A 200 to 1000 cps


N/A 7.5 to 10.0


N/A 8.7 lb/gal

Softening Point

N/A 350 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 98 g/L

Tensile Properties


N/A 50 %

Tensile Strength

N/A >4850 psi


N/A Tested at 2 Inches/Minute


N/A L-2892 can be used as a sole resin vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.


N/A L-2892 may be dried at ambient temperatures with supplemental co-solvent addition of 5 % DPM or DPnB on total formulation weight. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties without additional co-solvent.