An aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring.

Suggested Uses: HD-2139 was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend.

Characteristics:
  • High gloss
  • Excellent mar and wear resistance
  • Excellent resistance to staining
  • Remarkably high balance of physical properties
  • Contains n-methyl pyrrolidone (NMP) co-solvent
Unit of Measure

Physical Properties

Solids

N/A 33 %

Solids Tolerance

N/A ± 1 %

Viscosity

N/A 50 to 150 cps

pH

N/A 7.0 to 9.5

Density

N/A 8.7 lb/gal

Softening Point

N/A 360 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

N/A 122 g/L

Sward Hardness

N/A 50

Tensile Properties

Elongation

N/A 135 %

Tensile Strength

N/A >6000 psi

100 % Modulus

N/A 5700 psi

Note

N/A Tested at 2 Inches/Minute

Application

N/A HD-2139 can be used as a sole vehicle or blended with acrylic emulsions and applied by rotogravure, reverse roll, flexible blade, or wire wound rod. It may be thickened for alternative application methods.

Curing

N/A HD-2139 should be dried by forced hot air or heat lamp before entering oven. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. Maximum performance is attained with additions by weight of 5 % HA-801 melamine crosslinker or 4 % HA-800 aziridine crosslinker.