Request Information
An aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties.

Suggested Uses: HD-2107 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood.

Characteristics:
  • Extreme toughness, abrasion and mar resistance
  • Outstanding water and chemical resistance
  • Excellent exterior weathering performance
  • Can be crosslinked to enhance performance
  • Dilution and clean-up with ordinary tap water
  • Contains n-methyl pyrrolidone (NMP) co-solvent
Unit of Measure

Physical Properties

Solids

 N/A 35 %

Solids Tolerance

 N/A ± 1 %

Viscosity

 N/A 50 to 150 cps

pH

 N/A 8.5 to 10.0

Density

 N/A 8.7 lb/gal

Softening Point

 N/A 350 ºF

Volatile Organic Compounds (VOC) Content (As Supplied)

 N/A 147 g/L

Sward Hardness

 N/A 44

Tensile Properties

Elongation

 N/A 235 %

Tensile Strength

 N/A >7000 psi

100 % Modulus

 N/A 4800 psi

200 % Modulus

 N/A 6700 psi

Note

 N/A Tested at 20 Inches/Minute

Application

N/A HD-2107 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.

Drying

N/A HD-2107 can be air dried, if desired, depending on film thickness. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.