• A soft, aliphatic, polyester-based, aqueous polyurethane dispersion.

    Suggested Uses: HD-2101 was designed primarily for use on flexible substrates as a coating, saturant or impregnant.

    Characteristics:

    • Outstanding toughness and abrasion resistance
    • Excellent water and chemical resistance
    • Exceptionally high melting point for a medium soft polymer
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent

  • An aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties.

    Suggested Uses: HD-2107 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood.

    Characteristics:

    • Extreme toughness, abrasion and mar resistance
    • Outstanding water and chemical resistance
    • Excellent exterior weathering performance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent

  • A very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring.

    Suggested Uses: HD-2113 is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without the requirement for 180 degree reverse bend.

    Characteristics:

    • Very high gloss
    • Excellent mar and wear resistance
    • Exceptional chemical and stain resistance
    • Contains n-methyl pyrrolidone (NMP) co-solvent

  • An extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties.

    Suggested Uses: HD-2117 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance.

    Characteristics:

    • Outstanding water and chemical resistance
    • Fast early water resistance development
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent

  • A very hard, aliphatic, polyester polyurethane dispersion.

    Suggested Uses: HD-2120 was developed for use on flexible and rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components.

    Characteristics:

    • Superior adhesion to PVC
    • Excellent UV resistance
    • Exceptional alcohol resistance
    • Humidity resistance
    • Contains n-methyl pyrrolidone co-solvent

  • A hard, chemical-resistant, polyester-based, aliphatic, polyurethane dispersion.

    Suggested Uses: HD-2125 was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics.

    Characteristics:

    • Superior adhesion to PVC
    • Excellent UV resistance
    • Exceptional alcohol resistance
    • Humidity resistance
    • Contains n-methyl pyrrolidone co-solvent

  • An aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring.

    Suggested Uses: HD-2139 was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend.

    Characteristics:

    • High gloss
    • Excellent mar and wear resistance
    • Excellent resistance to staining
    • Remarkably high balance of physical properties
    • Contains n-methyl pyrrolidone (NMP) co-solvent

  • An aliphatic, polyester-based, water-borne polyurethane dispersion.

    Suggested Uses: HD-2142 was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components.

    Characteristics:

    • Superior adhesion to PVC and treated polypropylene film
    • Excellent UV resistance
    • Good alcohol resistance
    • Good humidity resistance
    • Contains n-methyl pyrrolidone co-solvent

  • An aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss.

    Suggested Uses: HD-2209 was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance.

    Characteristics:

    • Wet look gloss
    • Glass-like clarity
    • Mirror like definition-of-image
    • Adhesion to a wide variety of substrates: wood, plastics, textiles
    • Dilution and clean up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent

  • A soft, aliphatic, polycarbonate-based, polyurethane dispersion.

    suggested Uses: HD-2501 was designed primarily for use on flexible substrates as a coating, saturant or impregnant.

    Characteristics:

    • Maximum hydrolytic stability and oxidation resistance
    • Outstanding toughness and abrasion resistance
    • Good water and chemical resistance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent

  • A polycarbonate-based, aliphatic, water-borne polyurethane dispersion.

    Suggested Uses: HD-2503 was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. HD-2503 is ideally suited for exterior applications where film durability and longevity are important considerations.

    Characteristics:

    • Excellent exterior weathering durability
    • Excellent humidity resistance
    • Contains n-methyl pyrrolidone co-solvent

  • A very hard, polycarbonate-based, aliphatic, waterborne polyurethane dispersion.

    Suggested Uses: HD-2504 was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. HD-2504 is ideally suited for exterior applications where film durability and longevity are important considerations.

    Characteristics:

    • Superior chemical and stain resistance
    • Excellent exterior weathering durability
    • Excellent humidity resistance
    • Contains n-methyl pyrrolidone co-solvent

  • An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion.

    Suggested Uses: HD-2602 was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles.

    Characteristics:

    • May be formulated into low surface tension coatings
    • Excellent abrasion resistance
    • Non-fugitive silicone component
    • Crosslinkable for improved adhesion and performance
    • Contains n-methyl pyrrolidone co-solvent

  • A low cost, aromatic, polyether-based, aqueous polyurethane dispersion.

    Suggested Uses: HD-3011 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance.

    Characteristics:

    • Medium soft, tough, flexible film
    • Unusually dry surface for non-blocking applications
    • High melting for thermal stability
    • Can be crosslinked with melamines or aziridines for true thermoset character and increased adhesion.
    • Excellent hydrolytic stability
    • Contains n-methyl pyrrolidone (NMP) co-solvent

  • A hard, co-solvent free, aliphatic, aqueous polyurethane dispersion.

    Suggested Uses: HD-4669 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood.

    Characteristics:

    • Contains no co-solvent
    • Extreme toughness, abrasion and mar resistance
    • Outstanding water and chemical resistance
    • High melting point
    • Can be crosslinked to enhance performance

  • A hard, co-solvent free, aliphatic, polyester polyurethane dispersion.

    Suggested Uses: HD-4675 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood.

    Characteristics:

    • Contains no co-solvent
    • Produces clear, durable films with low levels of co-solvent (<100 g/l)
    • Excellent non-yellowing properties
    • Good water and chemical resistance
    • Produces tough, abrasion and mar resistant films

  • A cost effective, aliphatic polyurethane/acrylic hybrid dispersion with an exceptional balance of properties.

    Suggested Uses: HD-5002 was designed for coatings applications on a wide variety of plastic substrates, including ABS, Lexan, Noryl and polystyrene where abrasion and chemical resistance properties are required.

    Characteristics:

    • Extreme toughness, abrasion and mar resistance
    • Broad adhesion latitude to plastics
    • Outstanding water and chemical resistance
    • Excellent exterior weathering performance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains n-methyl pyrrolidone (NMP) co-solvent

  • A polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion.

    Suggested Uses: HD-6000 was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics.

    Characteristics:

    • Superior chemical resistance
    • Excellent exterior weathering durability
    • Excellent humidity resistance
    • Contains n-methyl pyrrolidone co-solvent

  • A polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion.

    Suggested Uses: HD-6002 was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer's Bayhydur 302 or Perstorp's Easaqua D 401/501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics.

    Characteristics:

    • Superior chemical resistance
    • Excellent exterior weathering durability
    • Excellent humidity resistance
    • Contains n-methyl pyrrolidone co-solvent

  • A low cost, co-solvent free, aromatic, polyether-based, polyurethane dispersion.

    Suggested Uses: L-2020 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance.

    Characteristics:

    • Medium soft, tough, flexible film
    • Unusually dry surface for non-blocking applications
    • High melting for thermal stability
    • Can be crosslinked with melamines or aziridines for true thermoset character and increased adhesion.
    • Excellent hydrolytic stability
    • Contains no co-solvent

  • A branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion.

    Suggested Uses: L-2357 was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but the use of a multiple component system is neither feasible nor desirable.

    Characteristics:

    • Contains no co-solvent
    • Medium hard, tough film
    • Polymer branching improves film resistance properties
    • Dries to clear, glossy, non-discoloring film
    • Dilution and cleanup of wet material with water

  • An experimental, non-halogenated, aliphatic, water-borne polyurethane dispersion.

    Suggested Uses: L-2728 was developed for use on un-primed, un-treated flexible TPO. Coatings containing this polymer form tough, flexible films. Excellent adhesion to TPO makes it the ideal candidate for sheet goods used in upholstered furniture, canopies, signs and other fabricated articles.

    Characteristics:

    • Very good adhesion to un-primed, flexible TPO
    • Good water and humidity resistance
    • Good UV-resistance
    • Good chemical resistance
    • Contains n-methyl pyrrolidone co-solvent

  • An NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion.

    Suggested Uses: L-2857 was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles.

    Characteristics:

    • May be formulated into low surface tension coatings
    • Excellent abrasion resistance
    • Non-fugitive silicone component
    • Crosslinkable for improved adhesion and performance
    • Contains dipropylene glycol dimethyl ether co-solvent

  • A hard, NMP-free, aliphatic, polyester polyurethane dispersion.

    Suggested Uses: L-2875 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood.

    Characteristics:

    • Contains DMM co-solvent
    • Produces clear, durable films with low levels of co-solvent (<100 g/l)
    • Excellent non-yellowing properties
    • Good water and chemical resistance
    • Produces tough, abrasion and mar resistant films

  • A hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties.

    Suggested Uses: L-2877 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood.

    Characteristics:

    • Balance of toughness, abrasion- and mar-resistance
    • Outstanding water and chemical resistance
    • Excellent exterior weathering performance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent

  • A very hard, NMP-free, APEO-free, aliphatic, polyester polyurethane dispersion.

    Suggested Uses: L-2882 was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture and components.

    Characteristics:

    • Superior adhesion to PVC
    • Excellent UV resistance
    • Exceptional alcohol resistance
    • Humidity resistance
    • Contains dipropylene glycol dimethyl ether co-solvent

  • An NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion.

    Suggested Uses: L-2883 was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X D 401. The product, when crosslinked provides tough, chemical-resistant, semi-gloss coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials.

    Characteristics:

    • Superior chemical resistance
    • Excellent exterior weathering durability
    • Excellent humidity resistance
    • Contains dipropylene glycol dimethyl ether co-solvent

  • An extremely hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties.

    Suggested Uses: L-2892 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-2892 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance.

    Characteristics:

    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent
    • Outstanding water and chemical resistance
    • Fast early water resistance development
    • Can be crosslinked to enhance performance

  • A polycarbonate-based, aliphatic, water-borne polyurethane dispersion.

    Suggested Uses: L-2896 was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. L-2896 is ideally suited for exterior applications where film durability and longevity are important considerations.

    Characteristics:

    • Excellent exterior weathering durability
    • Excellent humidity resistance
    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent

  • A hard, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, water-borne polyurethane dispersion.

    Suggested Uses: L-2897 was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates. This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics.

    Characteristics:

    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent
    • Excellent UV resistance
    • Exceptional alcohol resistance
    • Humidity resistance
    • Superior adhesion to PVC

  • An NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion.

    Suggested Uses: L-2942 was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components.

    Characteristics:

    • Superior adhesion to PVC and treated polypropylene film
    • Excellent UV resistance
    • Exceptional alcohol resistance
    • Humidity resistance
    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent

  • A soft, aliphatic, polyester-based, aqueous polyurethane dispersion.

    Suggested Uses: L-2969 was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-2969 may also be used as a blending resin with harder polyurethane dispersions to impart flexibility without adversely effecting chemical resistance.

    Characteristics:

    • Outstanding toughness and abrasion resistance
    • Excellent water and chemical resistance
    • Exceptionally high melting point for a medium soft polymer
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with water
    • Contains dipropylene glycol dimethyl ether co-solvent

  • An NMP-free, APEO-free, polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion.

    Suggested Uses: L-2996 was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer's Bayhydur 302 or Perstorp's Easaqua X D 401. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics.

    Characteristics:

    • Superior chemical resistance
    • Excellent exterior weathering durability
    • Excellent humidity resistance
    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent

  • A formulated polyurethane topcoat which gives a soft, silky feel at low gloss levels (2-4 gloss at 60 degree geometry).

    Suggested Uses: L-3033 is designed primarily for use on synthetic leather-like surfaces such as PVC, urethane, and various TPO's, as well as plastic films and other smooth surfaces.

    Characteristics:

    • Soft, silky feel
    • Inherently low gloss without the use of silica
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with water
    • Low VOC: <100 g/L

  • An NMP-free/APEO-free aliphatic, polyester-based, polyurethane dispersion designed to produce unequaled clarity and gloss.

    Suggested Uses: L-3040 was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever gloss and clarity are of paramount importance.

    Characteristics:

    • Wet look gloss
    • Glass-like clarity
    • Adhesion to a wide variety of substrates including wood, plastics, textiles, leather
    • Dilution and clean up with ordinary tap water
    • Contains dipropylene glycol dimethyl ether co-solvent

  • A very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion.

    Suggested Uses: L-3101 was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 is ideally suited for exterior applications where film durability and longevity are important considerations.

    Characteristics:

    • Superior chemical and stain resistance
    • Excellent exterior weathering durability
    • Excellent humidity resistance
    • Contains dipropylene glycol dimethyl ether co-solvent

  • A soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion.

    Suggested Uses: L-3121 was designed primarily for use on flexible substrates as a coating, saturant or impregnant.

    Characteristics:

    • Maximum hydrolytic stability and oxidation resistance
    • Outstanding toughness and abrasion resistance
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water
    • Contains dipropylene glycol dimethyl ether (DMM) co-solvent

  • A partially, renewable resource-based, hard, aliphatic, polyester-based, aqueous polyurethane dispersion with good chemical and water-resistance properties.

    Suggested Uses: L-3369 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3369 produces glossy films with excellent leveling properties and good stain- and chemical-resistance to a variety of household food and cleaning products.

    Characteristics:

    • 42 % bio-based, renewable resource content
    • Good water and chemical resistance
    • Low VOC content (75 g/L less water)
    • Can be crosslinked to enhance performance
    • Dilution and clean-up with ordinary tap water

  • TSCA - Pre-Manufacture Notification (PMN) in process.

    A VOC-free, water-borne, UV-curable polyurethane dispersion.

    Suggested Uses: Hauthane L-3415 is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring.

    Characteristics:

    • VOC-free, APEO surfactant free
    • Excellent chemical and stain resistance
    • Forms durable, films under ambient or force-dried conditions
    • Superior abrasion resistance
    • Fast water-release properties

  • An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion.

    Suggested Uses: L-3466 was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked.

    Characteristics:

    • May be formulated into low surface tension coatings
    • Exceptional dye transfer resistance
    • Excellent abrasion resistance
    • Higher silicone content (~2X) than HD-2602
    • Crosslinkable for improved adhesion and performance
    • Contains n-ethyl pyrrolidone (NEP) co-solvent